Custom Technical Plastic Parts | Brackets, Trays & Panels https://customplasticenclosures.com/product-category/simple-parts/ No Molds No Minimums No Wait Thu, 10 Apr 2025 14:51:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://customplasticenclosures.com/wp-content/uploads/2024/12/cropped-favicon-32x32.png Custom Technical Plastic Parts | Brackets, Trays & Panels https://customplasticenclosures.com/product-category/simple-parts/ 32 32 L-Shaped Bracket https://customplasticenclosures.com/product/l-shaped-bracket/ Wed, 19 Feb 2025 17:43:13 +0000 https://5b0e26d445.nxcli.io/?post_type=product&p=3645 L-Shaped Brackets are machined as flats and then folded by thermo-line bending them to the desired angles. They are often a lighter and more cost-effective alternative to metal brackets and don’t require a coating to prevent corrosion. Common uses are light, antenna and sensor mounts which often require a non-metallic material. Larger L-shaped parts [...]

The post L-Shaped Bracket appeared first on Click Fold Plastics.

]]>

L-Shaped Brackets are machined as flats and then folded by thermo-line bending them to the desired angles. They are often a lighter and more cost-effective alternative to metal brackets and don’t require a coating to prevent corrosion. Common uses are light, antenna and sensor mounts which often require a non-metallic material. Larger L-shaped parts are often used as clear safety hoods or sneeze guards. Other applications include tool holders, mounting clips and holsters. Commonly used materials are PC-ABS, clear PC or Acrylic and ABS-PVC (Kydex).

The post L-Shaped Bracket appeared first on Click Fold Plastics.

]]> U-Shaped Profile https://customplasticenclosures.com/product/u-shaped-profile/ Wed, 19 Feb 2025 17:42:41 +0000 https://5b0e26d445.nxcli.io/?post_type=product&p=3644 U-Shaped Profiles are machined as flats and then folded by thermo-line bending them to the desired shapes. Common uses are wire, tube, conduit, terminal block and bus bar covers that are electrical insulators to provide touch protection. Larger U-shaped parts are often used to make clear tunnels for the protection of conveyor and transfer belts [...]

The post U-Shaped Profile appeared first on Click Fold Plastics.

]]> U-Shaped Profiles are machined as flats and then folded by thermo-line bending them to the desired shapes. Common uses are wire, tube, conduit, terminal block and bus bar covers that are electrical insulators to provide touch protection. Larger U-shaped parts are often used to make clear tunnels for the protection of conveyor and transfer belts in the food and pharmaceutical industries. Other uses are material chutes and bumpers made from softer materials to reduce wear and noise for example in coin sorting machines. Commonly materials are ABS, HDPE and clear PC.

The post U-Shaped Profile appeared first on Click Fold Plastics.

]]> 5-Sided Tray https://customplasticenclosures.com/product/5-sided-tray/ Wed, 19 Feb 2025 17:42:07 +0000 https://5b0e26d445.nxcli.io/?post_type=product&p=3643 5-Sided Trays are usually made by capping a U-shaped profile. Common uses are drip, lab and condensation trays. Smaller trays can be used for potting electrical components. On the other end of the size range are large hoods to cover and protect outdoor valves, motors and sensors. Antenna and radome covers are made using polymers [...]

The post 5-Sided Tray appeared first on Click Fold Plastics.

]]> 5-Sided Trays are usually made by capping a U-shaped profile. Common uses are drip, lab and condensation trays. Smaller trays can be used for potting electrical components. On the other end of the size range are large hoods to cover and protect outdoor valves, motors and sensors. Antenna and radome covers are made using polymers that are transparent to the frequencies in use. Larger hoods can also be used for cladding carts that carry diagnostic or medical devices. Commonly used materials are ABS, PC-ABS and clear PC.

The post 5-Sided Tray appeared first on Click Fold Plastics.

]]> Two-Sided Panel https://customplasticenclosures.com/product/two-sided-panel/ Wed, 19 Feb 2025 17:41:06 +0000 https://5b0e26d445.nxcli.io/?post_type=product&p=3642 Two-Sided Panels are machined in the same fashion, only that a secondary machining operation allows for features to be machined on both sides. These often include blind holes and recessed cutouts to mount switches and dials. Typical applications include control and switch panels, vehicle and boat consoles, alarm and building management systems. Commonly used materials [...]

The post Two-Sided Panel appeared first on Click Fold Plastics.

]]> Two-Sided Panels are machined in the same fashion, only that a secondary machining operation allows for features to be machined on both sides. These often include blind holes and recessed cutouts to mount switches and dials. Typical applications include control and switch panels, vehicle and boat consoles, alarm and building management systems. Commonly used materials are PC-ABS, clear PC or Acrylic and aluminum composite materials (ACM). We can digitally print on these plastic panels with wear-resistant UV-cured inks to provide labeling, logos or other markings.

The post Two-Sided Panel appeared first on Click Fold Plastics.

]]> One-Sided Panel https://customplasticenclosures.com/product/one-sided-panel/ Wed, 19 Feb 2025 17:35:53 +0000 https://5b0e26d445.nxcli.io/?post_type=product&p=3641 One-Sided Panels are machined in arrays from plastic sheet-stock measuring 1/16 to 1/2″ in thickness. All features are on one side and typical applications include instrument panels, service covers and safety guards or windows. Commonly used materials are ABS, PC-ABS, clear PC or Acrylic and aluminum composite materials (ACM). We can digitally print on these [...]

The post One-Sided Panel appeared first on Click Fold Plastics.

]]> One-Sided Panels are machined in arrays from plastic sheet-stock measuring 1/16 to 1/2″ in thickness. All features are on one side and typical applications include instrument panels, service covers and safety guards or windows. Commonly used materials are ABS, PC-ABS, clear PC or Acrylic and aluminum composite materials (ACM). We can digitally print on these parts with wear-resistant UV-cured inks to provide labeling, logos or other markings. Other uses are mounting boards with pilot holes or threaded inserts to hold PCBs or other electrical/pneumatic components.

The post One-Sided Panel appeared first on Click Fold Plastics.

]]>